As of 2024, the warehousing and distribution sector in the United States accounts for around 5% of private-sector jobs.
With sites located in all 50 states, big or small, their impact on our everyday lives can’t be overstated, ranging from the food we buy at the grocery store to the equipment we use on our jobs.
It’s everything.
With so much at stake, it’s no wonder that they’re prime targets of criminal activity.
Trends in Crime
Employee theft is the most prevalent form of theft in warehouses, it can involve taking small items over time or coordinating larger thefts. It’s a growing concern, with reports indicating that staff theft increased by 4.6% for supplier and warehouse crime in 2019.
Due to the volume of valuable goods stored within warehouses, organized crime groups can also target warehouses for highly coordinated thefts. These groups often have insider knowledge and may collaborate with employees to facilitate the theft.
65% of burglaries occur during daylight hours, which indicates that criminals are taking advantage when staff are busy.
Cargo Theft
In the United States, cargo theft is a significant issue, with estimates between $15 billion and $30 billion in losses annually according to National Insurance Crime Bureau.
There are two types of cargo theft.
Straight cargo theft involves breaking into a truck or warehouse to steal goods directly.
Strategic cargo theft involves using fraudulent credentials to pick up shipments from warehouses. This type of theft saw a 600% increase from 2021 to 2022!
Scope of Work
Some of the largest distribution centers I’ve walked through exceeded a million square feet. Due to their size, they’re often financially difficult to protect, requiring security teams to choose the right level of security for each site.
Working from the outside in, these are the typical challenges and countermeasures.
Perimeter Security
Perimeter security is the first line of defense against unauthorized access, requiring a well lit fenced area around the facility to block casual trespassing and intruders intent on theft or vandalism.
Since most systems integrators stick with electronic security systems, fencing is typically implemented by a commercial fencing contractor working with a selected manufacturer.
I reached out to Brandy Byrd Chapman from ASSA ABLOY about securing warehouse perimeters, here’s what she had to say.
Your fence is the physical element that sets the boundary between public and private areas, it is there to protect not only your property but your employees as well so, it is important to think of the risks to a site, and the layout when designing the fence line.
Depending on the threat to the site, the fence can range from a basic chain link fence, or you can add anti-climb features, anti-cut rate, anti-dig and even crash rated features to the fence line. This gives you the ability to not only deter someone from breaking into your site, but delay their entrance. Some fence systems even give you the ability to mount and run your cameras, lights, and IDS systems down the fence line, so they are a fully integrated security system.
The go to fence systems is chain link fence, I always ask “How many chain link fences did you climb in your life” rarely do people say none. When faced with people entering a site and stealing property, delaying them at the fence line to give security time to respond is incredibly important, so using a fence that we all climbed as children, or one that can be cut easily might not be the correct answer for your site.
Make sure it is tall enough to make climbing taking time, 8 feet is the standard, and make sure someone can’t cut it easily with common tools and enter your site before someone can respond to the threat. Along with the fence system is the gates at the entrance to the site, it is important to not only look at the gaps under the gates to make sure no one can just crawl under it, but also how you are managing those that enter the site.
Tail gating is a common issue at the entrance of a site so, how do you stop the next car from following the one in front of it? Using traffic arms, lights, or signs can help stop people from running into your gate or entering your site, it is easier to plan for these items during the design phase of a site than trying to add them later.
The fence line is sometimes the last thing added to the design of a site, or is added later once the threat has occurred however, this makes protecting the site more difficult and more costly so, planning the fence line, the gate entrance, and the sequence of operations to stop the threat will save time, money, and incidents in the future.
Perimeter Intrusion Detection Systems (PIDS)
This is an area that’s grown a lot in recent years, in addition to photoelectric beams, fence-mounted sensors and buried fiber optic sensor cable, we’re seeing radar, lidar, AI analytics, and more.
These newer systems are designed to be cost effective and reduce false alarms. Many bring solid integrations with leading VMS and PSIM manufacturers, allowing for unified alerting on incursions.
Please let me know in the comments if you’d be interested in a podcast dedicated to discussing PIDS. We can review newer systems, and how they’re ensuring they’re alerting on legitimate threats.
Integrating video surveillance cameras with PIDS provides security teams with the confirmation they need on perimeter alerts and recording of incidents. Depending on the technology used, megapixel panoramic cameras and/or PTZs can help reduce camera count while elevating the overall security posture.
Gate Entrances
Controlling access and tracking trucks coming in and out of these facilities plays a critical role in supply chain security, but has its challenges.
Cameras installed at gates should be 5 - 8 megapixel bullet cameras equipped with sunshields, set to frame rates no lower than 15 FPS to provide the best image quality for vehicles entering and exiting the facility.
Depending on the set-up, verifying the identity and authorization of truck drivers at gates can be time consuming. As trucks enter the facility, cameras can be integrated with an intercom solution so that truckers aren’t required to step out of the cab to speak with security personnel.
Monitoring and recording the entry and exit of vehicles should also integrate with an intelligent analytic system to track and monitor, while alerting to unauthorized vehicles following authorized traffic through the gates (tailgating).
Employee Entrances
Employee entrances often have turnstiles and badging requirements to gain entry. These confirm credentialed personnel are entering into the workplace before reaching employee areas.
Most main entrances are secured with a combination of access control, intercom and video surveillance to ensure visitors are also properly vetted.
Around the facility, intrusion detection systems can alert on door props to help mitigate insider theft incidents, like employees throwing away products in dumpsters for later pickup.
Employee Parking Lot
Our last article “Safety Starts Here: Best Practices for Securing Parking Lots” mentions using Mobile Surveillance Units (MSUs) when power and connectivity aren’t available.
The same can be applied to warehouses and distribution centers that have large employee parking areas that often lack network connectivity and power and require video surveillance cameras to help monitor traffic and mitigate car theft.
Exterior Building
On the exterior of the building, properly mounted dome cameras can overlook roll-up doors, monitor cargo entering and exiting the facility, and high traffic areas for accidents.
Multi-sensor cameras are ideal for covering wider areas and building corners, making it easier to follow incidents of unauthorized people or vehicles on recordings.
Video surveillance within the facility is similar to other commercial buildings, with main entrances, employee time clocks, break areas, exits and offices.
AI analytics can monitor for things like OSHA compliance, i.e. forklift safety, PPE, hazardous material safety, proper use of machinery along with overall productivity.
Pallet Racks
Communication within these large facilities is important. Although handheld radios are common, Public Address systems are needed to stay compliant for announcements and emergency notifications.
The average height of pallet racks in warehouses is typically around 25 feet, with aisle lengths varying. Aisle width can vary from standard 10.5 - 13 feet wide, narrow aisles 8.5 - 10.5 feet wide and vary narrow aisles, 5 - 7 feet in width.
Regardless, pallet racks act as giant sound absorption structures that block needed communication to workers running forklifts throughout these aisles. This makes sending sound waves into these zones tricky, requiring a design that can both overcome the noise levels and the natural soundproofing.
IP loudspeakers can make this much easier than traditional speaker wiring, since these can be run together with other PoE devices such as cameras.
If a break-in does happen, a camera and public address integration can also help central monitoring stations give authorities a visual confirmation of intrusion, while also announcing that police are on their way.
Cages
Cages are often used for high ticket items limiting the number of employees with access to them. The security is pretty straight forward, with a combination of access control and cameras.
Loading Docks
The loading dock where trucks back up to load or unload goods should be monitored with high resolution cameras; those equipped with onboard analytics can be helpful to monitor traffic flow, watch for injuries, alert on fights and theft.
Likewise, each dock door provides access for loading and unloading trucks, typically equipped with a roll-up door, making camera angles and wide dynamic range extremely important.
Some common security concerns.
Keeping criminals out and from gaining access to loading bays to steal goods, either by breaking into the facility or colluding with dishonest employees.
Securing the loading dock area and implementing proper documentation and sealing procedures are crucial to prevent cargo tampering.
Some common life safety concerns.
Workplace violence.
Wet or uneven surfaces, debris, and inadequate lighting in loading dock areas can lead to slip and falls, causing injuries to workers.
Forklifts, trucks, and other vehicles maneuvering around the loading dock can collide with each other or with pedestrians, posing a significant safety risk.
Improperly stacked goods or unsecured equipment may fall from heights, posing a risk to personnel below.
Workers can get caught between trucks, trailers, or loading dock equipment, leading to serious injuries.
Transportation
Once the truck is loaded and the cargo is sealed, it usually becomes someone else’s responsibility. However according to CSCMP, “some of the largest manufacturers and retailers are seeking to monetize their own logistics capabilities”. That means security managers will need to also focus on the transportation of goods to and from their facility.
As mentioned earlier, a significant portion of financial loses occur at the transportation stage. Supply chain security will need to work with vendors that provide GPS tracking and monitoring systems.
Security Guards and Robotics
Security guard companies monitor many of these sites with a growing number of them augmenting their security detail with robots. This not only makes them more efficient, it allows them to surprise criminals who aren’t expecting them.
This is an exciting and growing area for physical security industry and one that I’ll discuss at greater length in the future.
We’ve barely scratched the surface when it comes to securing these sites. When we stop to think at what’s at stake, working together to design and implement comprehensive layered security solutions that help protect these supply chain facilities is of utmost importance.
Thanks for reading.


